Ultrasonic defect detection device (HIGH PERFORMANCE NARROW BAND DIGITAL ULTRASONIC FLAW DETECTORS)

Name: Ultrasonic defect detection device (HIGH PERFORMANCE NARROW BAND DIGITAL ULTRASONIC FLAW DETECTORS)
SKU: 559
Price: 27.000 USD
Availability: InStock

27.000$

Masterscan Series D-70

Model: D-70

Country of origin: England

The Sonatest heritage in product design and Masterscan name has always
assured the technician of robust instrument construction combined with
exceptional performance. The Masterscan series carries the baton of all
these desirable features, but now, thanks to innovative internal redesign,
new features can be added and upgrades performed in the working
environment, reducing downtime and increasing working ﬂexibility. High
levels of near surface resolution, penetrating power (450V pulser – square
and spike) and excellent signal to noise ratio are key functions in the
Masterscan range. Typical applications are Weld Fabrication, Corrosion
Detection, Composite Inspection, Bond Testing, Forgings & Castings, Power
Generation (including EMATS) and general UT inspection.

Description
Reviews (0)

Site Pack Option (D70 only)/ probe options
• Masterscan standard kit
• Rugged shipping case
• Airplane carry on size
• 488 Mm x 386 mm x 229mm
• 19.2 In x 15.2 In x 9.0 In
• Centre of gravity bracket
• Webbing bracket
• Magnetic bracket
• Webbing/two karabiners strap/hook

– Test Range: 0-1mm (0.04in) up to 0-20,000 mm (787 in.) in steel at 5930m/s (19455f/s)
– Velocity: 256 – 16000 m/s continuously variable.
– Probe: Zero 0 to 1000 μs.
– Delay: 0-20,000m (800in) in steel at 5930m/s.
– Gain: 0 to 110dB adjustable in 0.1, 0.5, 1, 2, 6, 14 and 20dB steps.
– Test Modes: Pulse echo and transmit/receive. Single Crystal, Double Crystal and Pitch-Catch.
– Damping: 50 and 400 Ohm damping selectable.
– Pulser: 100-450V -ve spike and square wave. Pulse Width from 30nS to 2500nS. Rise/Fall times <5nS into 50R load.
– P.R.F.: Adjustable 5Hz to 6kHz. External sync also available.
– Screen Update Rate: 60Hz
– Rectifcation: RF, Full wave, +ve half-wave and -ve half-wave.
– Frequency Range: 8 selectable flter bands.
+ 100kHz – 500kHz
+ 200kHz – 800kHz
+ 0.4MHz – 1.6MHz iv) 1.4MHz – 3MHz
+ 3MHz – 8MHz vi) 7MHz – 15MHz
+ 9MHz – 21MHz viii) 1.6 MHz – 33 MHz (Wideband)
+ Additional tuned low frequency pre-amp with Dryscan option.
– System Linearity: Vertical = 0.5% Full Screen Height (FSH). Horizontal +-0.2%. Trace Full Screen Width (FSW).
– Reject (Selectable): Up to 80% Linear reject (removes baseline noise without aﬀecting indication amplitude) Or Up to 50% Suppressive reject (increase zero oﬀset and reduces amplitude of all echoes). LED Warning when active.
– Units: Metric (mm), inch (in) or microseconds.
– Display Colour Transﬂective VGA (640 x 480) TFT.
+ Display area: 116.16 x 87.2 mm (4.57 x 3.43 in).
+ A-Scan Area: 400 x 510 pixels (normal), 460 x 620 (FS).
+ Colours: 9 colour options with variable brightness.
– Gate Monitor: Two independent gates for measurement and monitoring. Start and width fully adjustable over the entire range of the instrument. Levels adjustable from 0% to 100%, positive or negative triggering on each gate with audible & visual alarms. Gate resolution is 5nS.
– Zoom Expands range and delay to cover the area set by Gate 1 start & width controls.
– AGC Automatic Gain Control automatically sets the signal in Gate 1 to a level between 10% and 90% FSH, tolerance between 5% and 20%.